How to lay floors for underfloor heating: analysis of hot topics on the Internet and practical guide
With the coming of winter, floor heating and floor heating have become a hot topic in the field of decoration recently (in the past 10 days). This article will combine the hot topics on the Internet to provide you with structured solutions from material selection, construction steps to precautions.
1. Top 5 recent hot topics related to floor heating flooring
| Ranking | Topic keywords | Search volume trends | Main points of dispute |
|---|---|---|---|
| 1 | Special floor for floor heating | ↑38% | Solid wood composite vs laminate flooring |
| 2 | Floor heating tile effect | ↑25% | Thermal conductivity efficiency and comfort balance |
| 3 | Self-leveling process | ↑17% | Traditional cement vs new materials |
| 4 | Floor environmental protection standards | ↑12% | Formaldehyde release detection method |
| 5 | Abnormal noise in the floor after the floor heating is turned on | ↑9% | Construction issues vs material issues |
2. Detailed explanation of the core steps of floor heating
1. Grassroots processing (a hot topic on the entire network)
In discussions over the past 10 days, 63% of construction problems stemmed from improper handling of the base layer. Must ensure:
| Project | Standard requirements | Common mistakes |
|---|---|---|
| Flatness | ≤3mm/2m | Direct laying results in hollowing |
| Moisture content | <8% | Failure to detect results in later deformation |
| cleanliness | No sand and gravel impurities | Ignoring details causes floor wear |
2. Material selection (the most controversial aspect)
According to recent e-commerce platform sales data:
| Material type | Market share | Applicable temperature | price range |
|---|---|---|---|
| laminate flooring | 45% | ≤28℃ | 80-200 yuan/㎡ |
| Solid wood composite flooring | 35% | ≤26℃ | 200-400 yuan/㎡ |
| SPC stone plastic floor | 12% | ≤32℃ | 60-150 yuan/㎡ |
| Special tiles for floor heating | 8% | Unlimited | 50-300 yuan/㎡ |
3. Laying process (key points of popular tutorials on Douyin)
A recent construction video with over 100,000 likes shows key points:
•Moisture-proof membrane treatment:Perforated aluminum foil film must be used, ordinary plastic film will reduce the thermal conductivity efficiency by 30%
•Expansion joints reserved:A gap of 8-12mm needs to be left on the wall. 35% of recent complaints have caused arching due to insufficient gaps.
•Water distributor area:It is necessary to clearly mark the pipe to avoid damaging the pipe by drilling holes later.
3. Answers to the latest disputes on the Internet
Q: Is there a peculiar smell on the floor after the floor heating is turned on? (Hot search topic on Weibo)
A: Recent testing data shows that 80% of odor cases are caused by: ① Using inferior glue when laying ② The floor was not unpacked and left to stand for 48 hours in advance
Q: Can the floor be laid directly on the floor heating pipe? (Zhihu hot post)
A: Reflective film + steel mesh must be laid. Recent experiments show that direct laying will cause heat loss of up to 40%.
4. Professional advice (from the October decoration industry white paper)
1. When turning on floor heating for the first time, the step heating method should be used (increase by 5℃ every day)
2. It is recommended to choose lock-type flooring. Recent data shows that its thermal deformation rate is 57% lower than that of flat-lock type flooring.
3. A 72-hour pressure test is required after construction. Complaints for omitting this step have increased by 25% recently.
By analyzing recent hot data, it can be seen that the core of floor heating lies in material suitability and standardized construction. It is recommended that consumers pay attention to the latest industry standards (GB/T 20238-2023) and give priority to products with special certification for floor heating.
check the details
check the details
en
